Parts for Old Tractors
Click Here or call 800-853-2651
TRACTOR  PARTS TRACTOR  MANUALS

Antique Case Tractor: Case 500 Diesel

[Return to the Shed]

Case 500 Diesel Tractor


Do you have any comments or questions about this tractor? Ever use one? Know anyone who owned one? If so, please join in on the discussion below. Use the form for entering your comments.

Comments on this Tractor

Geoff Jones wrote on Wednesday, October 02, 2013 (PDT):
  • I have a case 580k backhoe and a User Friendly CD Service Manual my question is my 580k has a slide shift foot button on floor to slide the backhoe to the right and left using the bucket to push it and also the stabiliser arms are electric over hyd the arms retract inside the body of the legs which they wont go in or out only up down I cant find any information in this manual all I can find on the machine is 580k are other models in 580k series
    Alan T.Lewis wrote on Wednesday, June 12, 2013 (PDT):
  • Hello John Your note about the Case model 520 that you have is just an industrial version of the 500 , that also accounts for the different size tyres etc etc. Regards Alan T.Lewis Christchurch NEW ZEALAND
    steve Hall wrote on Wednesday, March 27, 2013 (PDT):
  • hi, nice web site,i am looking for a recon water pump for a case 500 can any body point me in the right direction thanks steve
    howard wagler wrote on Sunday, September 02, 2012 (PDT):
  • Found a Case 500 diesel. What should I be concerned about
    Michael wentz wrote on Wednesday, February 29, 2012 (PST):
  • Looking for head gaskets any ideas
    DalDrarge wrote on Saturday, February 26, 2011 (PST):
  • hi, good site very much appreciatted
    GARY LIVINGSTON wrote on Friday, December 10, 2010 (PST):
  • I HAVE A 1959 CASE 900B AND WOULD LIKE TO ADD HORSE POWER AND LUG, WOULD YOU HAVE ANY IDEAS.G
    Daryl Wentland wrote on Tuesday, June 01, 2010 (PDT):
  • When I was on the farm in North Dakota early to mid 1960 s we had a 500 Case that I did alot of field work with. After growing up on a two cyclinder JD the sound of that 6 cylinder diesel was soothing and calming plus lots of power. I have been away from the farm now for almost 40 years but would love to drive a 500 Case just one more time across the prarie plowing.
    Daryl Wentland wrote on Tuesday, June 01, 2010 (PDT):
  • When I was on the farm in North Dakota early to mid 1960 s we had a 500 Case that I did alot of field work with. After growing up on a two cyclinder JD the sound of that 6 cylinder diesel was soothing and calming plus lots of power. I have been away from the farm now for almost 40 years but would love to drive a 500 Case just one more time across the prarie plowing.
    Ernie Koop wrote on Sunday, January 24, 2010 (PST):
  • I am restoring a 500 diesel and needing some transmission parts. My engine runs very well and excited about getting it in the field but i need parts for my transmission. their is a serial no. break and i need the later no.my is 8181889 thanks
    jake schauer wrote on Sunday, December 06, 2009 (PST):
  • wanted-la diesel late 1950s case crawlers case 500,400,900 where very good tractors.
    Paul Doll wrote on Wednesday, November 11, 2009 (PST):
  • Have a 500 case runs great looks great would like to sell my dad took it to alot of tractor pulls did really well. I think he only lost twice.
    John wrote on Friday, August 21, 2009 (PDT):
  • Responding to Bill, August 6, 2009 - I have a Case 520. The main differences are the heavy front axle, bigger tires 950-15 fronts and 18-26 rears, the operator seat is higher and the batteries are moved forward. I ve been to a lot of tractor shows and have never seen another one like it.
    Bill wrote on Thursday, August 06, 2009 (PDT):
  • Anyone know anything about a Case 520 Yes 520, Industrial version of the 500. Value, what makes it industrial etc.
    Juliana Case wrote on Sunday, June 07, 2009 (PDT):
  • We have a 1961 Case 831 tractor that we need to set the timing on. Can anyone give us directions or specfications for this Thank you, Juliana Case
    Mary Brooks wrote on Friday, March 13, 2009 (PDT):
  • i have a i96 caseomatic 831c straight all around and ran when parked 2yrs ago this is a western nebr. tractor and clean 8sps. for./2rev. 6cyl. diesel would like to know approx. value or have fair offers
    victor wyatt wrote on Sunday, February 22, 2009 (PST):
  • I have a nice Case 500 but can t find the serial number,any ideas Would like to know the value,also.
    SHERRY WESTENDORF wrote on Wednesday, January 28, 2009 (PST):
  • How much horsepower is in a 900 case Anyone know
    Bill Pilkerton wrote on Thursday, January 22, 2009 (PST):
  • We are looking for a Case 400 gas 411 55-56-57 w/f,p/s eagle-hitch, as long its mechanical good ! Thanks, Bill
    Rick Fricke wrote on Friday, January 09, 2009 (PST):
  • My father bought a 500 new sometime in the mid-fifties, eventually it ended up in the hands of my grandfather Kenneth Grieser Defiance, OH who sold it sometime in the early 1970s. I would really like to locate it, but no one seems to remember who he sold it to. I do know the block was welded back in the 50s but never gave any problems. Please let me know if you might have any idea about its location - I imagine it is still in the general area of NW Ohio.
    Faan de Wit wrote on Saturday, January 03, 2009 (PST):
  • Where can I get parts for a Case 500 Diesel and what is the Case logo color on that Case 500 Diesel.
    Faan de Wit wrote on Saturday, January 03, 2009 (PST):
  • Where can I get parts for a Case 500 Diesel and what is the Case logo color on that Case 500 Diesel.
    Allen McIntosh wrote on Wednesday, July 16, 2008 (PDT):
  • My Grandfather purchased a 500 diesel from the Case dealer in Oakland Illinois sometime around 1956. He sold it in an auction in 1972. I would like to find this tractor since I use to ride in the fields with him in the early sixties when I was a little kid. I would be interested in purchasing to restore. His name was Ernest McIntosh from Kansas Illinois. Thank you.
    Gene Tuma wrote on Wednesday, June 25, 2008 (PDT):
  • Have a excellent running 500D, new starter, rubber, liquid and chainsfor sale in N.Minnesota. 412 401 3222
    Brooks wrote on Tuesday, May 06, 2008 (PDT):
  • Does anyone have information about the Case 510B-H Is it similar the 500 shown here Are parts interchangeable thanks in advance for any information.
    Jeremy wrote on Monday, April 28, 2008 (PDT):
  • I have a 400 Case diesel standard, and would like to sell. Needs some work but ran when i parked it a few years ago. Can anyone tell me about what it is worth
    roger a ackerman wrote on Monday, April 07, 2008 (PDT):
  • I have a 1971 Case 570, and I am looking for a Case 290 or 291 agriculture loader. I am also looking for a Case Canopy to fit this tractor. If anyone can help, please let me know.
    Randy Spayd wrote on Tuesday, March 25, 2008 (PDT):
  • I own a 400 caseomatic in running condition. Working on getting tires. If you re interested or have any information on where to find parts for this tractor I would really appreciate any help. Thanks Randy rnlspayd at power-net.net
    Mike Warrick wrote on Monday, February 18, 2008 (PST):
  • I have a Case 400 super diesel, Needs pistons and rings, I can sell complete tractor or sell parts off it.. I asm in Central Texas.....
    etuma wrote on Tuesday, November 13, 2007 (PST):
  • I have a Case 500, very good working order, new rubber all around plus liquid, chains and a short wood skidder in N. Minnesota Isabella that I d like to sell. Please contact me;412 401 3222
    steve lewis wrote on Friday, September 21, 2007 (PDT):
  • I have a 600 case that im thinking about selling. Good tractor! I still use it every spring for planting.The only major work I have done to it is grind the valves had one sticking,so I did all 12 nothing wrong with it ,just want something with a cab.
    glen evans wrote on Tuesday, August 14, 2007 (PDT):
  • drove 500 at night deep chiseling in1957
    Ryan Macko wrote on Monday, August 13, 2007 (PDT):
  • My grandpa owns a 500, i resently got it running in auto shop at school, we take it to the western ontario steam threshers, and pull it in the antiques, it os a greet tractor.
    Paul Kiss wrote on Tuesday, June 12, 2007 (PDT):
  • I ve got a IH T20 cletrac. I am interested in selling it. If anyone has an idea of people interested please let me know. I have pictures to send.
    Mike da Costa wrote on Friday, June 01, 2007 (PDT):
  • My grampa bought one new and I use to disc with it when I was 10 years old. I d love to have one myself. Anyone have one for sale.
    RICHARD FREDERICK wrote on Thursday, May 03, 2007 (PDT):
  • Looking for a 500 Case in good working order in Wisconsin. Anyone out there have one for sale Please contact me.
    Max wrote on Wednesday, April 25, 2007 (PDT):
  • I have a 500 case in good working order. My 500 have the case lights on the fenders and they work. I don t use it much and would like to find a good home for it.
    D. Mackinson wrote on Saturday, August 26, 2006 (PDT):
  • Hi there. Looking for a case 500 in running condition in Illinois.
    Robert wrote on Saturday, August 19, 2006 (PDT):
  • Dennis, The Case 600 was only built for one year. I think I was told 1958 or somewhere within a year either direction. According to a friend that knows the Case line well, he said that the total production was near 1,100 with about 300 of those on LP gas, and the rest diesel. As far as parts, they may be a little hard to find since the production was limited. I'll ask him about your questions and let you know what he says. He has 3 of them himself, one on LP and all running.
    Dennis Lausen wrote on Wednesday, August 16, 2006 (PDT):
  • I have located a Case 600 which doesn't have a serial tag.It is missing the starter but otherwise is intact.Can anyone enlighten me about this tractor as to parts availability , cubic inch displacement ect. It is a diesel.
    Marcus Becker wrote on Saturday, July 22, 2006 (PDT):
  • I have a case 500 diesel that I am rebuilding. I am searching for a set of heads or a parts tractor. I am located in washington state. Any help would be greaty appreciated.
    Barney wrote on Thursday, July 20, 2006 (PDT):
  • I purchased a 430 case diesel was told it needed a new clutch, starter was no good ,generator not working .adjusted the hand clutch reworked the starter cleaned the generator and the case sounds and run great one small problem I wou like to install power steering I have no idea how or where it goes I assume the pump connect in front of the rad can any advise me if i am the right track and where can I get the complete power steering unit Thank for your help
    Bob Gerber wrote on Wednesday, July 19, 2006 (PDT):
  • I have driven a 500 in my younger days when I worked for a case dealer. A friend of mine also has one and needs a head for it. I own a 900 diesel that I bought 2005 mecanical work is done, next is painting. I also have a C, D, DC-3, DC4 and case equipment.
    Simon wrote on Wednesday, June 21, 2006 (PDT):
  • I have a running 1953 Fiat 50 bulldozer with narrow guage tracks and a blade, could anyone tell me it's worth? Thanks, Simon.
    Jim wrote on Monday, June 12, 2006 (PDT):
  • Need info on setting the timing on my Case Diesel 400 injector pump ( American Bosch PSB )
    Kyle Williamson wrote on Tuesday, June 06, 2006 (PDT):
  • I just got a case tractor. For the model number it says its a 520. It looks very similar to this csae 500 i cant find any info on this tractor.call me at 803-609-6773
    Robert Russ wrote on Monday, May 08, 2006 (PDT):
  • i am wondering if any one is selling any case, mckormick, or international i live in south central wisconsin but dont want to hear anything about john deeres
    Harold J. Rauch wrote on Monday, March 20, 2006 (PST):
  • Hi there, I have a 1954 CASE 500 Diesel tractor, it is in pretty good condition, but it has a spun rod bearing on #3 cylinder, the engine is not stuck, it has rear wheel weights and power steering, tractor is all there, I have extra engine parts etc. I might consider selling it if I get what I am asking price for the tractor. I really don't have the time to work on it right now. Let me know if you have an interest, I live in Penna. and live 17 Miles North of Allentown, Pa. my phone # is 610-767-8370 if you would like to talk on the phone. Thanks, Harold
    Robert Russ wrote on Monday, February 27, 2006 (PST):
  • I am looking for a low priced 500 case in still good condition with lots or least repairs
    olan turer wrote on Tuesday, February 21, 2006 (PST):
  • four friends and i are building a 1968 830case comfort king for the houston livestock show and rodeo our deadline is feb.27 and we need a set of front grills,and a chrome piece for the side of the fuel tank thanks olan turner
    olan turer wrote on Tuesday, February 21, 2006 (PST):
  • four friends and i are building a 1968 830case comfort king for the houston livestock show and rodeo our deadline is feb.27 and we need a set of front grills,and a chrome piece for the side of the fuel tank thanks olan turner
    tony deepe wrote on Monday, February 20, 2006 (PST):
  • have a case 830 comfort king diesel good cond. wide and narrow front make offer
    Kevin Duskie wrote on Tuesday, December 13, 2005 (PST):
  • I am looking for a Case 900 LP, that is restorable, preferably in Midwest (KS,MO,NE,CO) Thanks
    Keith Sagehorn wrote on Saturday, November 12, 2005 (PST):
  • I would like to find the 1959 case 900 Diesel I grew up on It had big rubber(23.1x26) and the last I knew it had an Egging cab on it. If anyone knows of one like this please e-mail The tractor was from NE Colorado Thanks.
    GARY PARKER wrote on Tuesday, August 09, 2005 (PDT):
  • I HAVE THE 1956 CASE 301 THAT MY DAD FARMED WITH. I NEED THE SHEET METAL AND GRILL. WOULD LIKE TO PURCHASE A PARTS TRACTOR. SAVANNAH GEORGIA
    Budd wrote on Thursday, July 21, 2005 (PDT):
  • Is anybody intrested in a john 420 front axel
    kurt wrote on Wednesday, April 27, 2005 (PDT):
  • I am looking for a block for a 630 case diesel or complete engine or call 1-641-680-8231
    Réjean F.J. Meilleur wrote on Saturday, April 09, 2005 (PDT):
  • I have a Case 620 Ser.81008344..that is I am working on oneit runs goodLooking to installed a p.t.o. on it,is it still availableor what,,,any infos on it would be appreciated. Thank you (yes, I am in province of Québec, Canada)
    Andrew smith wrote on Saturday, April 02, 2005 (PST):
  • have a case 500 and many other case tractors need to know how to increce horepower for pulling
    j.w. secrest wrote on Friday, November 26, 2004 (PST):
  • would like any information on the case 500 and if anyone has anything on a 1936 rc case it would be very helpful. am trying to restore one. will need at least the right fender,radiator, and engine parts.
    Lawrence wrote on Tuesday, November 16, 2004 (PST):
  • I need a complete cylinder head for a 1954 Case 500 diesel (split head six), as well as a push rod for the exhaust valve.
    chuck wrote on Saturday, June 12, 2004 (PDT):
  • I have a 1961 model case 831 dual range diesel for sale. it is apart and is missing a few parts but the engine has had all new parts put in it. I can e-mail you some pictures if you like.
    Harold wrote on Friday, May 21, 2004 (PDT):
  • where can i get a power stearing set up for a case 400 the big 400 about a 1958
    jor wrote on Sunday, April 04, 2004 (PDT):
  • this is a Gay web site do you have a farmall cub
    Joe wrote on Wednesday, March 17, 2004 (PST):
  • I need a PTO unit for a 1969 Case 430 diesel tractor
    Dustin E Sheehy wrote on Sunday, February 29, 2004 (PST):
  • This is a very very very very nice site you have here,And whats your name. p.s. my real name is gene im going undercover
    TODD wrote on Tuesday, February 24, 2004 (PST):
  • I am looking for a (930-970) diesel case with cab anyone have one let me know im in southwestern ontario canada thanx.
    ANDY wrote on Wednesday, February 04, 2004 (PST):
  • I have a CASE 470 diesel some have said it is rair, does anyone know how many were made or if this is even true. I also need a INDEPENDENT PTO what other models used the same unit?
    Daniel gregor wrote on Tuesday, December 30, 2003 (PST):
  • I have a 500 not going .;( its got chips in two sleeves on the outer edge like they were hit with a hamer on instal. i cant find parts ,id like to get it going. so if u have eny imfomation e-mail me plese....Dan of Australia...
    Larry wrote on Friday, October 10, 2003 (PDT):
  • Hi all, I have a chance to by a 300 roundnose? I think because the sheetmetal is missing and the owner says it's between 1956-58.Anyway do you guys think this is a good puller?
    daniel gregor wrote on Saturday, September 20, 2003 (PDT):
  • ive got a 500 case i need liners and rings and pistons and a engen seal
    Roel wrote on Wednesday, September 17, 2003 (PDT):
  • Just got a 511B Lp gas , need to know if 500 is same to 511. Wantting to buy manual and from what I heard Case has a 500 gas. Need help just trying to restore for my father who loves old case tractors.Thanks for the help!
    mwilfer wrote on Wednesday, July 16, 2003 (PDT):
  • I've acquired a Case 500B (gas)wide-front with full hydraulic loader. It runs great and is in very good condition overall. However, I am seeking battery cover and inspection cover sheet metal and I am really desperate for a power steering unit (my gosh it is a bear to steer with the loader full!). I'm interested in any 500B for parts. Any help you can provide will be greatly appreciated. Thank you.
    Nyal in Australia wrote on Wednesday, July 02, 2003 (PDT):
  • We have a number of Cases from RC's to a 4894. Our 500 has done over 32000 hours and we still use it for dam slushing here in Oz.
    Bill Pilkerton wrote on Thursday, June 19, 2003 (PDT):
  • wanting to buy case 830 ck gas w/f 1969 the last year they were built! please e-mail me, thanks,bill
    David sprague wrote on Thursday, May 29, 2003 (PDT):
  • I would like to find one for sale in the north east
    Linda Ezzat wrote on Friday, March 07, 2003 (PST):
  • Can anyone tell me what the horsepower is on a Case 530 Diesel tractor.
    charlie hotalen wrote on Monday, February 17, 2003 (PST):
  • I HAVE ACASE 900 FOR SALE OR TRADE I USE IT FOR PULLING IN THE 8500 TO 12500 PULLS REAL GOOD CAN SEE PICTURE IN YESTERDAYTRACTORS.COM IT IS A 1959 DIESEL
    charlie hotalen wrote on Monday, February 17, 2003 (PST):
  • I HAVE ACASE 900 FOR SALE OR TRADE I USE IT FOR PULLING IN THE 8500 TO 12500 PULLS REAL GOOD CAN SEE PICTURE IN YESTERDAYTRACTORS.COM IT IS A 1959 DIESEL
    Tom Bush wrote on Tuesday, February 04, 2003 (PST):
  • Just got my 500 last week,my Grangfather had a "DC" he loved that Case,so in his honor I'm putting together a "DC" wide front and a "DC" tricycle,promptly named"LEE"&"LULA"(being my Grandmother)the "500" is my idea.I know he's smilin'.
    Ron Jackson wrote on Saturday, January 25, 2003 (PST):
  • HELP HELP I am trying to source a set of cylinder assemlies for a CASE 500 diesel. Does anyone have any leads??
    Clayton Oesch wrote on Wednesday, January 15, 2003 (PST):
  • I am looking for a grill for a 500 Case. I have helped restore one. A grill is the only thing left to find for it to be completely restored.
    Harold J. Rauch wrote on Friday, December 20, 2002 (PST):
  • I have a 1954 Case 500 Diesel, it is all in tact, but needs crankshaft work, it spun a bearing on #2 conn. rod. I have almost all the parts to do the job, it has almost brand new Armstrong rear tires, and the sheet metal is all good, I have to find some time to work on it. I live in Walnutport, Pa. I have lots of other Case tractors also, some are for sale. Thanks for listing, Harold
    Marv Larson wrote on Tuesday, October 29, 2002 (PST):
  • Yes, I've run one of these as new in 1955,working it 6-7 years. It was a good tractor for our needs, however, I didn't like the huge jump in gear ratio from 2nd to 3rd. 2nd was too slow, and 3rd was too fast. This tractor could've used another gear between. I understand that the 600 did have this improvement. Does anyone know for sure? I could be wrong on this point. I'm convinced that the MM- Model G would've been a better choice for us at the time. Being a teenager then, I had not that choice. I think $$$ cost was a considerable factor. The Case 500 was a less exspensive choice, and the man/operator availability, even though diminishing then, was sufficient to apply the extra time required to operate a smaller machine. Hence, an extra plow rating was not as important as was the initial cost, for us, near Choteau, Mt.
    rene j. patenaude wrote on Wednesday, October 16, 2002 (PDT):
  • I am trying to find pictures and the case eagle enblem for a 1955 case 400 . tell 802 988 9681 ask for rene.
    Stephen Brodie wrote on Tuesday, October 08, 2002 (PDT):
  • I was raised on John Deere green and still love the stuff, but just aquired a 930 and a 500. As a kid if 15 I worked for Farms in Alberta and had the opportunity to spend many hours on a 500. It was a brute compared to Dad's JD 70 Diesel, and it would have pulled that machine around against it's will. I remember the heat from that beast and the lulling sound of that fine machine, and the fact that it never broke, It's taken me 40 years to get back to driving one and it's Not for sale. I even called my last kid Case Brodie.
    Alan Dickson wrote on Tuesday, October 08, 2002 (PDT):
  • I have a Case 800 O Matic. Restoring but can't seem to get the radiator off because of a hydraulic line on the bottom that I can't get a wrench on because of close quarters. Has anybody had that problem. I think it's about 1960 or so vintage and runs beautifully on propane. Left out in a field in the Rain in Wa. State for 15 years, I rescued it put on new points, plugs, condenser and plug wires and it started up immediately but I need to get that radiator off.
    Ol Chief wrote on Wednesday, September 18, 2002 (PDT):
  • I have four case tractors 1470,1175 and 2- 900 diesels just love em all.Just shortly ago I bought the last 900Dfrom a JD nut.This is a 1959 with steel wheels in run down condition.Kind of unusual to find a machine from 1959 on steel.It was used to plow gumbo soil an I am sure it pulled it's guts out on that duty. I intend to use it to clear some of my land of Mesqete Trees.For those of you unfamiliar with these trees,theyhave beautiful wood grain when large enough to harvest,wonderful picture frame material and and great for smokeing meat.Problem is -they have very strong two and three inch needles when young and on farm land.Makes tillage w/ a regular wheel tractor nearly impossible.I hope to post a picture of this beast in its present run down condition soon.I would like to locate a power steering unit for it.
    Philip Carlman wrote on Saturday, June 22, 2002 (PDT):
  • I inherited a 1959 Case 700B Diesel when I bought a lakefront orange grove in Ocala, FL this year. It runs great but I would love a power steering unit for it. We've adapted a snowplow to it to clear the lakefront of vines and use it to disk harrow the grove. Any other 700b owners out there?
    MAC REYNOLDS SUNBURY AUSTRALIA wrote on Saturday, June 15, 2002 (PDT):
  • I have a CASE 930 Comfort King Western Special, purchased sight unseen at an Auction in Berrigan, NSW, Australia, when I picked it up, I was very pleased with the condition, I am looking for a set of Chaff Screens for it, if anyone can help, please contact me at the above email address. I intend to enter this tractor in Vintage Tractor Pulls - Classic Class, against the Chamberlain Super 70's & Super 90's.
    gene t wrote on Tuesday, June 04, 2002 (PDT):
  • Can someone tell me the difference between a 500D and a600D?
    john wrote on Saturday, June 01, 2002 (PDT):
  • we have a 1951 case 500 in our family and wanted to know the approximate value of of it.it still runs good.
    Larry Robinson wrote on Thursday, May 30, 2002 (PDT):
  • Where can i buy the fuel separator that mounts underneath the injection pump on my case 500 diesel?
    Sharon wrote on Thursday, May 30, 2002 (PDT):
  • I am looking for information concerning the Case 600 LP and the Case 700 diesel tractors. If anyone knows how many were made and their capacities, I am interested. sharonthurston at hotmail.com
    Brutus wrote on Sunday, April 07, 2002 (PDT):
  • I have a 59 900 dsl. The same holds true for them about that nice sounding engine. Have plowed against an 80 JD both with 4-14's. Deeres 3rd gear was between case's 2nd and 3rd. In tough ground I ran in 2nd. In 3rd the 80 could;nt keep up. Operator is comfort is another matter, all that banging would drive me nuts. A muffled Case dsl won't deafen you after a long day. Sorry i'm kind of biased!
    mark roller wrote on Monday, March 25, 2002 (PST):
  • looking for 500 case for parts hood and grill
    Ben Winegard wrote on Sunday, February 24, 2002 (PST):
  • Looking to buy a case 500 or a 56-57 case 600 please contact me if you have any information. thanks
    mitch Hankamer wrote on Thursday, February 21, 2002 (PST):
  • My grandad owed a case dealership in the 50's. I have a lot of parts for L's, LA's and 500's. New rear wheels, fenders, gas tanks, front ends, grills, belts, carb parts, magneto's , steering yokes, spindles, hubs call for more info mitch 409-794 1616
    albert sparks jr wrote on Tuesday, February 19, 2002 (PST):
  • i am looking for a 400 case diesal or gas any condition and i would like to locate a dc for parts as i have one now and need parts
    kevin gross wrote on Friday, January 25, 2002 (PST):
  • about 10 yrs ago my grandfather found the exact 1954 case 500 he bought brand new .trailered it homeand rebuilt it from the ground up in the fall of last year we watched his 2 D's and his S along with 2 mcCormicks and a John AR go in auction when the farm was sold due 2 cancer. the 500 is all my family has left to remind us of 55 yrs of that farm sitting in my garage with this piece of raw iron is the origional sales flyer and shop manual im always looking 4 more Case memorabilia...if anyone has interesting memorabilia please e-mail mellgross10 at hotmail.com
    Otávio Machado wrote on Tuesday, June 19, 2001 (PDT):
  • I need information about CASE 900, 1956. Please, send information!
    Phil Levitte Michigan wrote on Thursday, May 31, 2001 (PDT):
  • If Packard had built a tractor it would have been the 500
    Bruce Anderson wrote on Tuesday, April 24, 2001 (PDT):
  • I own a working 500 dieseland I'm looking for a oil pan. Would consider buying one for parts. When you have a tractor as great as this you want to keep it up.
    Rudi Stegen wrote on Wednesday, March 21, 2001 (PST):
  • I bought a Case 500 three days ago and I am thrilled with the sound ,power BUT hell the steering needs Arnold Schwartzerneger to turn it. Is there a POWER STEERING unit available. We in South Africa are a bit low on spares and manuals
    Ron Jackson, from Australia wrote on Wednesday, November 01, 2000 (PST):
  • I have a 500 in a very worn out state. It has sat in the weather for probably 20 years after being used by a ploughing contractor for years. He told me he had worn out 18 sets of rear tyres and rebuilt the engine twice! The tractor is almost complete but missing the hour meter. Does anyone have a spare hourmeter and bracket?? A friend of mine bought another 500 from the same area ( a small rural community with a population of probably 50 people) but his is running - those comments about the sound of that six cylinder are certainly correct - sweet.
    ralph meyer wrote on Monday, October 02, 2000 (PDT):
  • The first 500 Diesel i ever saw was a "509" power unit in a feed mill. I was just a seven year old kid from a hill farm where our "big" tractor was an SC. I wondered if I would ever see a real tractor with that great big engine. Now we have three 500s, two 400s,two 401s, and one 801 . All make sweet Case Diesel music . Does anyone have a grille for a 400 ?
    P. Getman wrote on Sunday, September 17, 2000 (PDT):
  • The 500 Case Diesel I own has been with me since 1977. Purchased it from an IH dealer in the Syracuse Ny area. At the time it had new 34 inch Rear tires. Being unfamiliar with the hand clutch, it took me very little time to get used to it. I looked over some of the stories of other people and the PTO has been a little bothersome but I did replace all the disc & cluthches a couple years ago. The parts came from IH-Case. I happened to have a parts book with mostly good part numbers for the 500D. I use a Hesston Habine, Old PTO New Holland 77 Haybaler, and plow my corn garden with it. The engine purrs steady.
    gene t wrote on Sunday, August 20, 2000 (PDT):
  • I just purchased a 500 diesel and would like to attach a 3 pt hitch and/or a front end loader to it----any 0ne with experience or ideas please contact---Thank you-Gene T
    mike V. wrote on Tuesday, August 15, 2000 (PDT):
  • I own a 500 desiel,It,s for sale. 337-363-3180
    chris freeman wrote on Monday, July 17, 2000 (PDT):
  • I have a 400 66hp that looks just like the 500 does anyone kn0w the color it was when new
    Thor-Oskar Thyrum "Norway" wrote on Friday, July 07, 2000 (PDT):
  • I have bay a case tractor"disel" 196? i think the name is 380 or 480 .The tractor have front-Equiptment and King-Kunstruksjon Grave-Euiptment rear of the Tractor I am intresting in all kaind off info of this Tractor
    Kriss wrote on Thursday, July 06, 2000 (PDT):
  • I am also looking for a 500, 600, or900. I need a tractor for pulling, my dc can only pull two classes.
    John Houser wrote on Wednesday, June 28, 2000 (PDT):
  • My dad bought a 500 diesel new in 1954 with a 5-14" Case plow. We ran it until 1970. I grew up on it. It was a very well engineered machine for it's time. It could pull. I have good memories of it.
    Reddog wrote on Tuesday, June 27, 2000 (PDT):
  • Would like to buy Case 500, 600, or 900.
    steve warters wrote on Wednesday, June 21, 2000 (PDT):
  • I am looking a air intake cap for 500 diesel
    Mike S. wrote on Friday, June 16, 2000 (PDT):
  • Looking for a 530 case, front end loader. Preferably gasoline engine.Known as The Construction King, this was a sweet sounding Tractor. My Grandfather had one and I'm looking for one like it. 3pt hitch, power take off. No Backhoe. If anyone could help me, or has one they would like to sell, you can E-Mail me at majsrs at aol.com Thanks, Mike S
    greg wrote on Friday, June 16, 2000 (PDT):
  • need a 400 case with caseomatic tha is in working condition
    mike wrote on Wednesday, June 14, 2000 (PDT):
  • I am looking into purchasing a used case 300 with loader. can anyone advise whatthis tractor should sell for. also, looking for thoughts from anyone that has used this model. thanks
    Jeany wrote on Saturday, June 03, 2000 (PDT):
  • I'm looking for a color photo or drawing of a 1959 Case 700 so I can frame it for my husband. He's restoring one. I don't know much about the tractors. Is there a Model 700? Maybe I didn't get the number right. Thanks for your help.
    J. F. Perry wrote on Monday, May 15, 2000 (PDT):
  • Have a 430 Case diesel needs clutch replaced. Does anyone know where I could find parts to get this fine tractor running again? thanks.
    Jim Newbegin wrote on Sunday, May 07, 2000 (PDT):
  • Does anyone know anything about a "401" Deisel Case, that's what is on the ID plate. It starts and runs good, it also has a high and low range in the transmission, no seperate lever.
    Robert Sell wrote on Monday, April 24, 2000 (PDT):
  • I have an old A-C model M with tricycle front end. Engine has cracked block. most of the rest is there for parts. Phone (509) 732 6221 with any offers.
    Robert Sell wrote on Monday, April 24, 2000 (PDT):
  • I have a dead Case 500 Diesel. Phone (509) 732 6221 with any offers. This machine is restoreable or would be good for most of the parts.
    Robert Graves wrote on Monday, April 24, 2000 (PDT):
  • Lookin to purchase a Case Super Diesel 400. . .in running condition.
    RON KENNEDY wrote on Friday, March 24, 2000 (PST):
  • I AM WRITING FROM AUSTRALIA TO LET YOU KNOW A NUMBER OF 500 CAME OUT HERE, I REMEMBER SEEING ONE A LOT OF YEARS AGO.MY DAD OWNED A 18-32, THEN AN L MODEL. I OWNED A 930 COMFORT KING AND NOW HAVE A 1936 L IN THE BACKYARD. REGARDS RON
    GREG GRUBE wrote on Saturday, February 26, 2000 (PST):
  • I am looking for a 500 if anyone in the OHIO area has one they would like to sell. MY phone # is 740 467-2223
    Wyatt Olsen wrote on Saturday, February 26, 2000 (PST):
  • I bought a 500 Case at a auction about 10 years ago.It still runs great and is in good condition. My only problem is that I need a PTO, and I can't find the parts. I hate to sell a machine that runs this good, but I found a 730 close by for $2500 that has what I need. I payed $950 for my 500 and would really like to keep it. If anyone has a dead 500 with a PTO I would like to hear from you.
    Don Rudolph wrote on Saturday, February 12, 2000 (PST):
  • The 500 must be the best sounding diesel engine of all time. In this part of Wisconsin that would have been a very large tractor in the mid 50's. The first time I ever saw one was in 1969 ar a Case dealer being rebuilt and the dealer saw that I was impressed with it and started it up for me to hear. I decided right then that someday I would have one and 4 years ago I found a very nice one in Iowa and rescued it from JD land. I love talking Case tractors. Thanks for listening. Don Rudolph
    Donelle & John Kilburg wrote on Wednesday, January 12, 2000 (PST):
  • We are looking for information about a Case 900 B from 1958, serial number 8129640. This tractor is in running condtion, we are looking for a price value or range. Also if you have any pictures that would be great too. If you also have any other web sities about this tractor or know of any, let us know. Thank you for your time. Donelle & John Kilburg
    Ron wrote on Thursday, December 30, 1999 (PST):
  • To Darrell Faryna. I know what you mean about the "sweetest sounding 6 cylinder diesel". I believe that is because of the lower RPM and high torque. They were and are great tractors. My favorite of all time is the 930 Comfort King.
    Dan Miller wrote on Wednesday, December 29, 1999 (PST):
  • grandfather was case dealer around 1955 I have 630 diesel need parts for eagle hitch ,can anyone help?
    Dan Miller wrote on Wednesday, December 29, 1999 (PST):
  • grandfather was case dealer around 1955 I have 630 diesel need parts for eagle hitch ,can anyone help?
    Dwayne Bauersachs wrote on Sunday, December 26, 1999 (PST):
  • I own a 500, 900, SI, SC, 1070 Black Knight, 400, & many more. I antique pull with the 900. I also tractor pull with one of my 1070 tractors. I've been the points winner 2 years in a row in the Il Hot Farm Stock Pullers Assoc. My family collects lots of Case items. I know a lot of information about tractor pulling with a Case. Call me at (618)357-9290 eve.Does anyone have any Case wrenches?
    Larry Wegener wrote on Friday, December 10, 1999 (PST):
  • We are restoring our family Case 500. Acquired a spare 500 and a 600. Have many parts. Need rubber for 30" x 15" rims & wheel weights. 815 344-0063
    Darrell Faryna wrote on Thursday, December 09, 1999 (PST):
  • These are really great machines! It probably has one of the sweetest sounding six cylinder diesel engine of its era. It is a lively tractor for its size(except for its power steering,which is kind of slow) and really digs in and snorts in the rough spots. Our 500 Diesel did a lot of acreage on our Alberta farm without a whimper and is now in the process of restoration. It is 99% complete now and a real jewel to look at and run.
    William Naudain wrote on Thursday, November 11, 1999 (PST):
  • I have a case 500 diesel and am in the process of getting ready to restore it. I would like to find another one for parts,as mine is kind of rough but runs decent. I am also going to pull mine in the antique tractor pulls in this area.
    6-JAYS wrote on Monday, November 01, 1999 (PST):
  • I have used a case 500 in the past and now own a 500 and a 900,both western tractors also have an S.C and a 800 and am inthe process of purchasing a 700 and a 400 and another sc I don't have e-mail but I'll watch this site
    Josh Dubie wrote on Sunday, June 27, 1999 (PDT):
  • how much for the case 500 diesel in the picture?


    Use This Form to Add Your Own Comments or Questions

    Your Name:
    E-Mail:

    [Return to the Shed]



  • SHOP  FOR  PARTS SHOP  FOR  MANUALS
    Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F).  Expedited shipping available, just call!  Most prices for parts and manuals are below our competitors.  Compare our super low shipping rates!  We've kept the same low rate for six years.  We are a Company you can trust and have generous return policies!   Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

    Home | Forums


    Copyright © 1997-2016 TractorShed.com

    All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.

    TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within these website pages are the property of their respective trademark holders. None of these trademark holders are affiliated with TractorShed.com, our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.